Close views show the cloudy stone shade, the looped cord, and the warm metal fittings
01Pale alabaster fills the frame, its surface mottled with soft cream clouds, faint seams, and a slightly translucent sheen02A braided cord passes through two brass openings in the round backplate and settles into a loose loop, while a small screw sits on the plate’s right side03The braid enters a short brass collar above a domed fitting that rests on the alabaster shade, with two small screws set into the metal
Wall sconce
Carved teardrop,
soft ambient glow
A hand-carved teardrop shade of white Spanish alabaster hangs from a woven bronze braided cord on an antique brass backplate. Earthy veining in the stone softens the light into a low, atmospheric ambient glow. It suits a powder-room mirror, a moody hallway, a bedroom headboard, or a reading nook
Highlights
Stone, cord, and brass
A wall sconce of Spanish alabaster, braided cord, and brass, made for a soft ambient glow
01
Spanish alabaster shade
The teardrop shade is hand-carved from natural Spanish alabaster, with unique earthy veining in every piece
02
Brass body finishes
The brass body is offered in antique bronze or black, with a woven bronze braided cord holding the shade
03
Candelabra light
It uses an E26 or E27 candelabra base, the bulb is sold separately, and it dims with a dimmable bulb and a compatible dimmer
04
One listed size
The sconce is D 12cm x H 44cm / ∅ 4.7″ x H 17.3″
Specifications
Size and light
Depth
∅ 4.7″ (12 cm)
Height
17.3″ (44 cm)
Socket type
E26 or E27 candelabra base
Bulb included
No — sold separately
Dimmable
Yes — dimmable bulb and compatible dimmer switch
Wiring
Hardwired
Body material
Brass
Shade material
Spanish alabaster
Body color
Antique bronze · Black
Shade color
White
Antique Bronze & White Spanish AlabasterD 12cm x H 44cm / ∅ 4.7″ x H 17.3″
Black & White Spanish AlabasterD 12cm x H 44cm / ∅ 4.7″ x H 17.3″
HOZO Installationsanleitung
Planen Sie Ihre Beleuchtung.
Raumweise Startwerte für Leuchtengröße, Montagehöhe, Abstand und Durchgangshöhe. Tippen Sie ein Kapitel an.
01
Esstisch
Größe und Mitte vom Tisch aus festlegen, dann die Sicht von jedem Sitz prüfen.
So messen
Tischlänge und -breite messen. Bei runden Tischen den Durchmesser nehmen.
Startbereich
Runde Leuchten: etwa 1/2 bis 2/3 der Tischbreite. Längliche Leuchten: 1/2 bis 2/3 der Tischlänge.
Platzierung
Die Leuchte über dem Tisch zentrieren, nicht zwingend über dem Raum.
Abstand
76–91 cm über der Tischplatte beginnen.
Bei langen Tischen wirken zwei kleinere Pendel oft natürlicher als eine übergroße Leuchte.
Vor dem Bohren
Eine Papierschablone an die Decke kleben und vom Türrahmen sowie sitzend prüfen.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenMitte des Tisches
02
Kücheninsel
Die nutzbare Insel messen und die Pendel auf der Mittellinie halten.
So messen
Nutzbare Länge und Breite der Insel messen.
Startbereich
Eine Linienleuchte: 1/2 bis 2/3 der Insel-Länge. Mehrere Pendel: erst den Durchmesser, dann die Anzahl wählen.
Platzierung
Pendelmitten gleichmäßig auf der Insel-Mittellinie.
Abstand
76–91 cm über der Arbeitsplatte. Äußere Pendel nicht an den Inselenden.
Die komplette Reihe mocken, nicht nur ein Pendel.
Vor dem Bohren
Drei Papierkreise über der Insel zeigen Abstandsprobleme schneller als ein einzelnes Muster.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenGleiche Mitten
03
Raummitte
Länge plus Breite ergibt den Startdurchmesser. Deckenhöhe und visuelle Schwere machen die Entscheidung fertig.
So messen
Raumlänge und -breite in Metern plus fertige Deckenhöhe.
Startbereich
Länge + Breite (m) × 8,3 ergibt einen üblichen Startdurchmesser in cm. Beispiel: 3,7 + 3,0 → ca. 56 cm.
Platzierung
Die architektonische Mitte nur nutzen, wenn sie vom Eingang und vom Möbelplan her Sinn ergibt.
Abstand
Mindestens 2,10 m lichte Höhe unter dem tiefsten Punkt im Laufbereich.