The raw material of this lamp is acrylic, after high-density special technology treatment, in addition to the original basis to further increase the water resistance of this lamp.
Keeping mosquitoes at bay outdoors is a matter of importance, and while different colors of lamps have different probabilities of attracting mosquitoes, black and white, two low-saturation colors, are far less likely to attract mosquitoes than other colors, making this black and white color scheme wall sconce an excellent choice for an outdoor lamp.
The shape of the wall lamp has a hierarchical, which is reflected in the lamp holder for the width of the rectangular lampshade is slightly wider than the formation of the gap between the two, highlighting the sense of line, a simple combination but increased the design of the artistry, but also can be very good on the white lampshade to prevent dust.
This wall light can be used to illuminate most areas outdoors, such as doorways, hallways, fences, etc., which can increase the safety of walking at night.
Product Info
Type
Outdoor Light,
Style
Orr
Suggested Space Fit
Outdoor
Suggested Room Size
/
Indoor or Outdoor Use
Outdoor
Dimmable
Has Dimmable Version
Luminous Color
/
Smart Enabled
No
Need Assembly
Yes
IP rate
IP65
Power source
Hardwired/Solar
Power Info
Bulb Included
Yes for LED-chip, No for Light Bulb
Bulb Type
LED/Incandescent/Fluorescent
Bulb Base
SMD
Number of Bulb
1
Voltage (V)
110V-240V
Maximum Wattage(W)
3W
Product Material
Primary Product Material
Acrylic
Fixture Product Material
Acrylic
Shade Product Material
Acrylic
Product Measurements & Weights
Product Weight
/
Chain/Cord Adjustable or Not
No
Size
See Images
Included Components
1* Outdoor Light, -
Note
The lampshade is made of Polycarbonate and has a protection rating of IP65. This means that the lamp is protected against a rain shower but is not completely waterproof. We recommend placing the lamp under a shelter. Please kindly note that there may be an error of 1-3cm of the size due to manual measurement. The pictures may have slight chromatism due to the light and the monitor. We appreciate your understanding in advance. It's recommended that the installation of the lamp is performed by a professional electrician.
Please make sure to check the dimensions of the backplate for the product before placing your order. If the backplate doesn't completely cover the junction box in your home, you'll need to purchase an extra backplate to ensure proper fitting.
HOZO Installationsanleitung
Planen Sie Ihre Beleuchtung.
Raumweise Startwerte für Leuchtengröße, Montagehöhe, Abstand und Durchgangshöhe. Tippen Sie ein Kapitel an.
01
Esstisch
Größe und Mitte vom Tisch aus festlegen, dann die Sicht von jedem Sitz prüfen.
So messen
Tischlänge und -breite messen. Bei runden Tischen den Durchmesser nehmen.
Startbereich
Runde Leuchten: etwa 1/2 bis 2/3 der Tischbreite. Längliche Leuchten: 1/2 bis 2/3 der Tischlänge.
Platzierung
Die Leuchte über dem Tisch zentrieren, nicht zwingend über dem Raum.
Abstand
76–91 cm über der Tischplatte beginnen.
Bei langen Tischen wirken zwei kleinere Pendel oft natürlicher als eine übergroße Leuchte.
Vor dem Bohren
Eine Papierschablone an die Decke kleben und vom Türrahmen sowie sitzend prüfen.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenMitte des Tisches
02
Kücheninsel
Die nutzbare Insel messen und die Pendel auf der Mittellinie halten.
So messen
Nutzbare Länge und Breite der Insel messen.
Startbereich
Eine Linienleuchte: 1/2 bis 2/3 der Insel-Länge. Mehrere Pendel: erst den Durchmesser, dann die Anzahl wählen.
Platzierung
Pendelmitten gleichmäßig auf der Insel-Mittellinie.
Abstand
76–91 cm über der Arbeitsplatte. Äußere Pendel nicht an den Inselenden.
Die komplette Reihe mocken, nicht nur ein Pendel.
Vor dem Bohren
Drei Papierkreise über der Insel zeigen Abstandsprobleme schneller als ein einzelnes Muster.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenGleiche Mitten
03
Raummitte
Länge plus Breite ergibt den Startdurchmesser. Deckenhöhe und visuelle Schwere machen die Entscheidung fertig.
So messen
Raumlänge und -breite in Metern plus fertige Deckenhöhe.
Startbereich
Länge + Breite (m) × 8,3 ergibt einen üblichen Startdurchmesser in cm. Beispiel: 3,7 + 3,0 → ca. 56 cm.
Platzierung
Die architektonische Mitte nur nutzen, wenn sie vom Eingang und vom Möbelplan her Sinn ergibt.
Abstand
Mindestens 2,10 m lichte Höhe unter dem tiefsten Punkt im Laufbereich.