Close views show the woven shade surface and the brushed-brass plate where the curved arm joins it
01A cream woven fabric fills the frame, its fine, even grid of threads catching soft light02Brushed brass forms a shaped plate with layered curves at the top, a small round button, and the start of a curved arm at the lower right03A curved brass arm leaves a ringed collar beside two round buttons and a raised rectangular panel on the plate
Wall sconce
Curved arms,
white bell shades
Curved arms leave the wall plate in a downward sweep, level out, then rise slightly into white bell-shaped fabric shades. Each shade is wide at the lip, gently tapered, and edged with rim trim that reads from across the room. Light passes through the white fabric and spreads from one compact head or from two heads on a single back plate
Highlights
Finish, size, and light
The body is brass or black, the shade stays white, and you choose one head or two
01
Brass or black
Polished brass arms and body read as a warm line on the wall; matte black reads as a graphic silhouette. The shade is white fabric on both
02
One head or two
The single head is 15 cm deep, 19 cm wide, and 38 cm high. The two-head version is 38 cm deep, with the same 19 cm width and 38 cm height, both arms leaving one back plate
03
White fabric bell
The shade is a fixed white fabric bell, wide at the lip and gently tapered, with rim trim. It does not change with the body finish
04
E12 or E14 bulbs
Each arm uses one E12 or E14 candelabra socket, and bulbs are not included. A 2–4W LED flame-tip at 2700K warm white is recommended; a standard cylinder or globe LED also works
Specifications
Size and light
1-head depth
15 cm / 5.9″
1-head width
19 cm / 7.5″
1-head height
38 cm / 15″
2-head depth
38 cm / 15″
2-head width
19 cm / 7.5″
2-head height
38 cm / 15″
Socket
E12 / E14 candelabra, one per arm
Bulbs
Not included; user-replaceable
Recommended bulb
2–4W LED E12/E14 candelabra, 2700K warm white
Dimming
With dimmable E12/E14 LED bulbs and a compatible TRIAC wall dimmer, both sold separately
Voltage
AC 110–240V
Brass & White1 head ∅ 5.9″ x W 7.5″ x H 15″
Polished Nickel & White1 head ∅ 5.9″ x W 7.5″ x H 15″
Black & White1 head ∅ 5.9″ x W 7.5″ x H 15″
Brass & White2 heads ∅ 15″ x W 7.5″ x H 15″
Polished Nickel & White2 heads ∅ 15″ x W 7.5″ x H 15″
Black & White2 heads ∅ 15″ x W 7.5″ x H 15″
HOZO Installationsanleitung
Planen Sie Ihre Beleuchtung.
Raumweise Startwerte für Leuchtengröße, Montagehöhe, Abstand und Durchgangshöhe. Tippen Sie ein Kapitel an.
01
Esstisch
Größe und Mitte vom Tisch aus festlegen, dann die Sicht von jedem Sitz prüfen.
So messen
Tischlänge und -breite messen. Bei runden Tischen den Durchmesser nehmen.
Startbereich
Runde Leuchten: etwa 1/2 bis 2/3 der Tischbreite. Längliche Leuchten: 1/2 bis 2/3 der Tischlänge.
Platzierung
Die Leuchte über dem Tisch zentrieren, nicht zwingend über dem Raum.
Abstand
76–91 cm über der Tischplatte beginnen.
Bei langen Tischen wirken zwei kleinere Pendel oft natürlicher als eine übergroße Leuchte.
Vor dem Bohren
Eine Papierschablone an die Decke kleben und vom Türrahmen sowie sitzend prüfen.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenMitte des Tisches
02
Kücheninsel
Die nutzbare Insel messen und die Pendel auf der Mittellinie halten.
So messen
Nutzbare Länge und Breite der Insel messen.
Startbereich
Eine Linienleuchte: 1/2 bis 2/3 der Insel-Länge. Mehrere Pendel: erst den Durchmesser, dann die Anzahl wählen.
Platzierung
Pendelmitten gleichmäßig auf der Insel-Mittellinie.
Abstand
76–91 cm über der Arbeitsplatte. Äußere Pendel nicht an den Inselenden.
Die komplette Reihe mocken, nicht nur ein Pendel.
Vor dem Bohren
Drei Papierkreise über der Insel zeigen Abstandsprobleme schneller als ein einzelnes Muster.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenGleiche Mitten
03
Raummitte
Länge plus Breite ergibt den Startdurchmesser. Deckenhöhe und visuelle Schwere machen die Entscheidung fertig.
So messen
Raumlänge und -breite in Metern plus fertige Deckenhöhe.
Startbereich
Länge + Breite (m) × 8,3 ergibt einen üblichen Startdurchmesser in cm. Beispiel: 3,7 + 3,0 → ca. 56 cm.
Platzierung
Die architektonische Mitte nur nutzen, wenn sie vom Eingang und vom Möbelplan her Sinn ergibt.
Abstand
Mindestens 2,10 m lichte Höhe unter dem tiefsten Punkt im Laufbereich.