Curving Sweeping Arms Glow Chandelier – Metal and Fabric Style – Dining Table Entry Living Areas
Preț obișnuit€426.00
Preț de vânzare€426.00Preț obișnuit€446.00
/
Vorbește despre brandul tău
Asociați textul cu o imagine pentru a vă concentra asupra produsului, colecției sau articolului de blog ales. Adăugați detalii despre disponibilitate, stil sau chiar oferiți o recenzie.
Three views show the satin metal grain, the underside of the central body, and where the curved arms leave the hub
01A tight view of warm golden metal, covered in fine, even horizontal brush marks that catch the light in a soft satin sheen02Seen from below, a round brushed body sits under a straight central stem, with curved arms rising from its top edge and a small rounded fitting at the center of the underside03Curved arms leave the top of the circular body through short collars beside the central stem, all in the same brushed gold finish, with a short cylinder visible underneath
Brass and fabric chandelier
Curving arms,
inviting glow
Sweeping arms curve in brass around white fabric shades and exposed candelabra bulbs. The bulbs cast an inviting glow over a dining table, through a high-ceiling entry, or across a living area. Six- and eight-head versions share one width and height, with black, vintage brass, or satin nickel for the body
Highlights
Material, size, and light
Brass, fabric, two head counts, and candelabra sockets define the fixture
01
Brass body, fabric shades
The body is brass and the shades are fabric
02
Six or eight heads
Both the 6-head and 8-head versions measure D 106cm × H 60cm / ∅ 41.7″ × H 23.6″, with a 19.7″ (50cm) chain that can be trimmed
03
Candelabra light source
Sockets are E12 or E14 candelabra base. Bulbs are sold separately, and dimming needs a dimmable bulb plus a compatible dimmer switch
04
Three body finishes
Body colors are black, vintage brass, and satin nickel. The shades are white
Specifications
Size and light
6 heads
D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
8 heads
D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Chain length
19.7″ (50cm) — adjustable / trim to suit
Heads
6 or 8
Socket type
E12 or E14 candelabra base
Bulb included
No — sold separately
Dimmable
Yes — requires dimmable bulb and compatible dimmer switch
Wiring
Hardwired · sloped ceiling compatible
Vintage Brass · Version without Lampshade6 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Black · Version without Lampshade6 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Black · Version with Lampshade6 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Satin Nickel · Version without Lampshade6 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Satin Nickel · Version with Lampshade6 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Black · Version without Lampshade8 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Black · Version with Lampshade8 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Satin Nickel · Version without Lampshade8 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
Satin Nickel · Version with Lampshade8 heads D 106cm × H 60cm / ∅ 41.7″ × H 23.6″
HOZO Installationsanleitung
Planen Sie Ihre Beleuchtung.
Raumweise Startwerte für Leuchtengröße, Montagehöhe, Abstand und Durchgangshöhe. Tippen Sie ein Kapitel an.
01
Esstisch
Größe und Mitte vom Tisch aus festlegen, dann die Sicht von jedem Sitz prüfen.
So messen
Tischlänge und -breite messen. Bei runden Tischen den Durchmesser nehmen.
Startbereich
Runde Leuchten: etwa 1/2 bis 2/3 der Tischbreite. Längliche Leuchten: 1/2 bis 2/3 der Tischlänge.
Platzierung
Die Leuchte über dem Tisch zentrieren, nicht zwingend über dem Raum.
Abstand
76–91 cm über der Tischplatte beginnen.
Bei langen Tischen wirken zwei kleinere Pendel oft natürlicher als eine übergroße Leuchte.
Vor dem Bohren
Eine Papierschablone an die Decke kleben und vom Türrahmen sowie sitzend prüfen.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenMitte des Tisches
02
Kücheninsel
Die nutzbare Insel messen und die Pendel auf der Mittellinie halten.
So messen
Nutzbare Länge und Breite der Insel messen.
Startbereich
Eine Linienleuchte: 1/2 bis 2/3 der Insel-Länge. Mehrere Pendel: erst den Durchmesser, dann die Anzahl wählen.
Platzierung
Pendelmitten gleichmäßig auf der Insel-Mittellinie.
Abstand
76–91 cm über der Arbeitsplatte. Äußere Pendel nicht an den Inselenden.
Die komplette Reihe mocken, nicht nur ein Pendel.
Vor dem Bohren
Drei Papierkreise über der Insel zeigen Abstandsprobleme schneller als ein einzelnes Muster.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenGleiche Mitten
03
Raummitte
Länge plus Breite ergibt den Startdurchmesser. Deckenhöhe und visuelle Schwere machen die Entscheidung fertig.
So messen
Raumlänge und -breite in Metern plus fertige Deckenhöhe.
Startbereich
Länge + Breite (m) × 8,3 ergibt einen üblichen Startdurchmesser in cm. Beispiel: 3,7 + 3,0 → ca. 56 cm.
Platzierung
Die architektonische Mitte nur nutzen, wenn sie vom Eingang und vom Möbelplan her Sinn ergibt.
Abstand
Mindestens 2,10 m lichte Höhe unter dem tiefsten Punkt im Laufbereich.