Edge Lit Disc Floor Lamp With Even Glow Plane – Modern Sculptural Style – Living Room Accent Light
Preț obișnuit€500.00
Preț de vânzare€500.00Preț obișnuit€1,350.00
/
Vorbește despre brandul tău
Asociați textul cu o imagine pentru a vă concentra asupra produsului, colecției sau articolului de blog ales. Adăugați detalii despre disponibilitate, stil sau chiar oferiți o recenzie.
Three details show the matte white leg, the curved disc rim, and the pivot where the disc meets the stand
01A matte white cylindrical leg fills the frame, its surface finely textured and softly shaded along one edge02Parallel curved bands form the disc rim, with a small squared joint where the outer arc meets the frame03The round disc rests on a short cylindrical pivot that splits into three slender tripod legs
Edge-lit tripod floor lamp
Even glow,
set to any angle
A flat translucent acrylic disc sits in a wrought iron tripod and looks solid white until it is switched on. Light entering the edge then fills the whole face as one even plane, with no visible source or hotspot in the disc. Tilt the disc on its gyroscopic axis to send light toward the ceiling, across a wall, or anywhere between
Highlights
One disc, aimed by hand
The same edge-lit disc, tilt, and dimming come in two sizes and two frame finishes
01
Edge-lit acrylic
An integrated LED feeds the rim of a translucent white acrylic disc so the full face glows as a uniform plane
02
Two disc sizes
Choose a 50 cm disc for living rooms and bedrooms, or a 70 cm disc where the lamp is a main light or visual anchor. Both share an 80 cm base
03
Black or white
A matte black wrought iron frame sets the white disc against a dark structure. A white frame stays close in tone when the disc is unlit and lets the glow read cleanly when it is on
04
TRIAC dimming
The built-in LED dims with a standard TRIAC wall dimmer or an in-line cord dimmer, from full output down to a soft residual glow. It plugs in with a 150 cm cord
Specifications
Size and light
Small disc
∅ 50 cm / ∅ 19.7″
Small base
∅ 80 cm / ∅ 31.5″
Small height
163 cm / 64.2″
Large disc
∅ 70 cm / ∅ 27.6″
Large base
∅ 80 cm / ∅ 31.5″
Large height
180 cm / 70.9″ in the size guide; 168 cm in the specifications list
Height note
FAQ describes both versions as roughly 163–168 cm
Cord
150 cm / 59″
Disc
Translucent white acrylic, edge-lit, on a gyroscopic axis
Frame
Wrought iron, black or white
Light source
Integrated LED, non-replaceable
Dimming
Built-in TRIAC dimming; standard wall dimmer or in-line cord dimmer
Power
Plug-in
Voltage
AC 110–240V
Black · US Plug∅ 19.7″ x ∅ 31.5″ x H 64.2″ (Trichromatic dimming)
White · US Plug∅ 19.7″ x ∅ 31.5″ x H 64.2″ (Trichromatic dimming)
White · US Plug∅ 27.6″ x ∅ 31.5″ x H 70.9″ (Trichromatic dimming)
HOZO Installationsanleitung
Planen Sie Ihre Beleuchtung.
Raumweise Startwerte für Leuchtengröße, Montagehöhe, Abstand und Durchgangshöhe. Tippen Sie ein Kapitel an.
01
Esstisch
Größe und Mitte vom Tisch aus festlegen, dann die Sicht von jedem Sitz prüfen.
So messen
Tischlänge und -breite messen. Bei runden Tischen den Durchmesser nehmen.
Startbereich
Runde Leuchten: etwa 1/2 bis 2/3 der Tischbreite. Längliche Leuchten: 1/2 bis 2/3 der Tischlänge.
Platzierung
Die Leuchte über dem Tisch zentrieren, nicht zwingend über dem Raum.
Abstand
76–91 cm über der Tischplatte beginnen.
Bei langen Tischen wirken zwei kleinere Pendel oft natürlicher als eine übergroße Leuchte.
Vor dem Bohren
Eine Papierschablone an die Decke kleben und vom Türrahmen sowie sitzend prüfen.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenMitte des Tisches
02
Kücheninsel
Die nutzbare Insel messen und die Pendel auf der Mittellinie halten.
So messen
Nutzbare Länge und Breite der Insel messen.
Startbereich
Eine Linienleuchte: 1/2 bis 2/3 der Insel-Länge. Mehrere Pendel: erst den Durchmesser, dann die Anzahl wählen.
Platzierung
Pendelmitten gleichmäßig auf der Insel-Mittellinie.
Abstand
76–91 cm über der Arbeitsplatte. Äußere Pendel nicht an den Inselenden.
Die komplette Reihe mocken, nicht nur ein Pendel.
Vor dem Bohren
Drei Papierkreise über der Insel zeigen Abstandsprobleme schneller als ein einzelnes Muster.
MessenPlatte bis Unterkante
Hängehöhe76–91 cm
AusrichtenGleiche Mitten
03
Raummitte
Länge plus Breite ergibt den Startdurchmesser. Deckenhöhe und visuelle Schwere machen die Entscheidung fertig.
So messen
Raumlänge und -breite in Metern plus fertige Deckenhöhe.
Startbereich
Länge + Breite (m) × 8,3 ergibt einen üblichen Startdurchmesser in cm. Beispiel: 3,7 + 3,0 → ca. 56 cm.
Platzierung
Die architektonische Mitte nur nutzen, wenn sie vom Eingang und vom Möbelplan her Sinn ergibt.
Abstand
Mindestens 2,10 m lichte Höhe unter dem tiefsten Punkt im Laufbereich.